Sunrise
Semi-Auto CNC Ironworker
66 Ton to 185 Ton
Sunrise Semi-Automatic CNC solutions turn a 66 to 185 ton dual-cylinder ironworker or a single-end punch with a 20 inch or deeper throat into a programmable punching machine. A pendant-mounted touch-screen controller drives CNC X and Y stops on a positioning table; the operator pushes plate or angle against the stops and triggers the punch, so hole patterns come from the program rather than manual layout, eliminating layout errors and scrap. Tables run from 16 x 40 inches up to 26 x 120 inches, position at up to 590 inches per minute, and hold plus or minus 0.004 inch per foot. An optional Windows PC controller imports DXF and NC1 files with nesting; the ANC automatic linear in-feed punch and a CNC plate shear are related options.