Geka Single Cylinder Series

Geka-Logo-Small Geka Microcrop Ironworker Geka Ironworker Minicrop 45 Geka Ironworker Multicrop 45 Geka Ironworker Bendicrop 50
FEATURES
MICROCROP 36
MINICROP 45
MULTICROP 45
BENDICROP 50
Punching power 40 tons 50 tons 50 tons 55 tons
ø through thickness ø1-1/16" x 3/8" ø 1-1/16" x 1/2" ø 1-1/16" x 3/8" (a) ø 1 1/4" x 1/2"
(b) ø 1-1/16 x 1/2"
Shear for flat bar 13¾” x ¼”
8” x ½”
10” x 3/8”
8” x ½”
10” x 3/8”
8” x ½”
14” x 3/8”
(5º) 14”x ½”
Shear for section iron L at 90º 3” x 3” x 5/16" 3” x 3” x 5/16" 3” x 3” x 5/16" 3” x3” x 5/16"
Shear for section iron L at 45º 2" x 2" x 1/4" - 2¼” x 2¼” x ¼” -
Notching * 2”x1½”x¼” 2”x1½”x¼” 3½”x1 9/16”x3/8”
Bending attachment * * * 4” x 3/8”

Capacities based on a material resistance of 45 kg./mm2 or 65,000 tensile
* Optional
 
  • Overview
  • Specifications

This range includes four electrically driven models with the following standard equipment: work table, limit switches and measuring scales. The shearing system consists of one single cut, without wasting any material. The MINICROP and MULTICROP have been fitted with a patented floating blade for cutting section iron without any deformation of the material.

CONFIGURATION
 
MICROCROP
MINICROP
MULTICROP
BENDICROP
L  90º
L  45º
2 legs 
1 leg 
2 legs
1 leg
Flat bar
Punching
Notching
Optional for punching station
Bending
Optional for punching station
Optional for punching station
Optional for punching station
Electric stop
Pre installation
Pre installation
Pre installation
FEATURES
 
MICROCROP
MINICROP
MULTICROP
BENDICROP
SHEAR FOR FLAT BARS
 
 
 
 
 
Flat bars (low deformation)
in.
13 3/4" x 1/4"
10" x 3/8"
10" x 3/8"
14" x 3/8"
in.
8" x 1/2"
8" x 1/2"
8" x 1/2"
(5º) 14" x 1/2"
Length of blades
in.
14"
12"
12"
14"
Round bars ø
in.
1-3/16"
-
-
-
Square bars
in.
1"
-
-
-
Shear of one angle leg L at 45º
in.
2 1/2"
3"
3"
2 1/2"
Working height
in.
38 1/2"
40 1/2"
40 1/2"
810
SHEARS FOR SECTION IRON
 
 
 
 
 
L a 90 º
in.
3" x 3" x 5/16"
3" x 3" x 5/16"
3" x 3" x 5/16"
3" x 3" x 5/16"
L a 90 º
(with slight deformation)
in.
-
4" x 4" x 3/8"
-
-
L a 45 º
in.
2" x 2" x 1/4"
-
2 1/4" x 2 1/4" x 1/4"
-
Round Bar ø
in.
1 3/8 (optional)
1 1/4"
1"
1 3/8"
Square bar
in.
1 1/4" (optional)
1 1/4"
1 1/2"
1 1/4"
NOTCHING
 
(OPTIONAL)
 
 
 
Plate thickness
in.
5/16"
1/4"
1/4"
3/8"
Angle of 
in.
2 1/2"
2 1/2"
2 1/2"
4"
Depth
in.
2"
2"
2"
3 1/2"
Width
in.
1 3/8"
1 1/2"
1 1/2"
1 9/16"
PUNCHING
 
 
 
 
 
Punching power
Ton
40
50
50
55
Maximum capacity
in.
ø 1-1/16" x 3/8"
ø 1-1/16" x 1/2"
ø 1-1/16" x 1/2"
(A) ø 1 1/4"x 1/2"
 
 
 
 
(B) ø 1-1/16" x 1/2"
Throat
in.
6 5/8"
6 7/8"
6 1/4"
7"
Stroke
in.
28
21
21
50
Working height
in.
38 1/2"
40"
40"
38 3/8"
BENDING ATTACHMENT
 
(OPTIONAL)
(OPTIONAL)
(OPTIONAL)
INTEGRATED
Bending Power
Ton
36
45
45
50
Maximum width
in.
3"
3"
3"
4"
Maximum capacity
in.
3" x 1/2"
3" x 9/16"
3" x 9/16"
4" x 3/8"
GENERAL SPECIFICATIONS
 
 
 
 
 
Motor
H.P.
3
4
4
7 1/2
nº strokes per minute (stroke= 15in.)
-
24
16
16
34
Net weight
Lbs
1067
1760
1985
2095
Gross weight
Lbs
1265
2690
2425
2530
Packaging dimensions
in.
43" x 30"x 59"
52" x 43" x 59"
54" x 44" x 67"
66" x 31" x 38"
Volume of seaworthy package
Ft.3
45
80
90
94
 
 
 
 
 
OPTIONAL EQUIPMENT
 
 
 
 
 
 
 
 
 
 
SHEARS FOR SECTION IRONS
 
 
 
 
 
U and U section iron
in.
2"
4"
4"
4"
PIPE NOTCHING
 
 
 
 
 
maximum diameter
in.
2"
2 1/4"
2 1/4"
2 1/4"
PUNCHING LARGER DIAMETERS
 
 
 
 
 
Maximum diameter
in.
ø 1-13/32" x 5/16"
ø 4" x 5/32"
ø 4" x 5/32"
ø 4" x 5/32"