Peddinghaus Angle Line

Peddinghaus Anglemaster
  • Overview
  • Specifications

AFCPS 823 Anglemaster

The Peddinghaus Anglemaster model AFPS-643/Q combines multi-tool punching with a powerful single cut shear and part marking system. This latest evolution of the industry standard Anglemaster has proven to be the first choice of world class fabricators all over the globe fast, efficient, and reliable angle production.

Process 12 x1" plate AND 8 x 8 x 3/4" angle in one machine! Deliver parts for Just In Time fabrication ahead of schedule. The single cut shear on the Peddinghaus Angle line minizies scrap and material handling. Double punch capability allows for punching different sizes without stopping production or punching two holes at one time.

  • Process angle up to 
    200 x 20 mm / 
    8 x ¾ inch

  • Process flat stock up to 
    200 x 25 mm / 
    12 x 1 inch

  • Punch all holes and shear to length

  • Carbide part marking

Pinpoint Accuracy

Patented Entry and Exit Measuring wheel ensures accuracy for “end of material” measuring no matter your angle bar length. Safeguard your reputation by producing Accurate parts quicker than your competitors 100% of the time.

One Pass Technology

Angles and flats are processed in one pass, reducing set-up time and delivering true punching performance.


We believe reliability is just as important as speed and accuracy. The rugged steel frame construction assures long machine life which equates to more years of profit making potential for your firm.

Rollerfeed Measuring

Minimize inventory and increase through put by loading material outside your shop. Roller feed technology provides more benefits over measuring carriage systems including: flexible material flow, reduced maintenance, no lost cycle time to clamp and unclamp, continual processing speed, and no problems associated with coped or cambered sections.

Single Cut Shear

“Where speed is” 
Full material utilization with no scrap loss. Optimized software helps to protect your investment. 

What is the difference between a single cut and a double cut shear? 

5-15% less scrap material!

A single cut shear produces no scrap when shearing your part. Double cut shears leave an average .5 inch scrap slug every time you produce an angle clip.

Unparalled Production

Two Men may produce 4160 Clips in one month working 40 hour weeks. An Anglemaster will produce the same in less than 17 hours, with one operator.

Angle Maximum - Punch Only 8" x 8" x 1 1/4"
Angle Maximum - Punch and Shear 8" X 8" X 3/4"
Angle Minimum 1-1/2" x 1-1/2" x 1/8"
Flat Maximum - Punch Only 12" x 1 1/4"
Flat Maximum 12" x 1"
Flat Minimum - Punch and Shear 3" x 1/4"
Punch Capacity 130 Tons
Punch Throat 12"
Punch Stroke 2.25"
Maximum Material Thickness -Punch Only 1-1/4"
Maximum Hole Size 1-1/2"
Shear Capacity 400 Tons
Tooling Style Single Cut