Americor LH-Roll Plate Bending



Americor 4 Roll
  • Overview
  • Specifications

Three-roll single-pinch bending rolls featuring hydraulically powered rear bending rolls with electronic digital readout for displaying roll position, hydraulically powered pinch roll adjustment, hydraulic drop end, cone bending attachment, rolls hardened to 50Rc and much more.

Standard Equipment on all Bending Roll models:

  • Hydraulically powered rear bending roll adjustment
  • Electronic digital readout for rear bending roll position
  • Hydraulic drop end
  • Hydraulically powered lower pinch roll adjustment, with easily adjustable pinch pressure control with gauge
  • Dual rotation controls - console mounted and remote hand control on trailing lead
  • Cone bending attachment
  • Rolls hardened to 50Rc
  • Roller bearings on all roll shafts
  • Powered tilting of the rear bending roll for cone rolling
  • Simple manual tilt of the lower pinch roll
  • Emergency stop cable at front and rear of machine
  • Hydraulic oil, tools, and manual

3-Roll - Specifications by Model

Model Capacity Roll
Diameter
Weight
(pounds)
Motors
Drive Hydraulic
LH 80/3 3' x 13 ga. 3.15" 1100 2 HP 1 HP
LH 80/4 4' x 14 ga. 3.15" 1210 2 HP 1 HP
LH 100/4 4' x 11 ga. 3.93" 1400 2 HP 1 HP
LH 130/4 4' x 10 ga. 4.72" 3000 2 HP 1 HP
LH 160/4 4' x 1/4" 6.3" 3880 5 HP 1 HP
LH 180/4 4' x 3/8" 7.10" 4300 5 HP 2 HP
LH 200/4 4' x 9/16" 7.87" 4480 5 HP 2 HP
LH 80/5 5' x 16 ga. 3.15" 1580 2 HP 1 HP
LH 100/5 5' x 12 ga. 3.93" 1830 2 HP 1 HP
LH 130/5 5' x 10 ga. 4.72" 3120 2 HP 1 HP
LH 160/5 5' x 1/4" 6.3" 4150 5 HP 1 HP
LH 180/5 5' x 5/16" 7.10" 4840 5 HP 2 HP
LH 200/5 5' x 1/2" 7.87" 5000 5 HP 3 HP
Model Capacity Roll
Diameter
Weight
(pounds)
Motors
Drive Hydraulic
LH 130/6 6' x 11 ga. 4.72" 3400 2 HP 1 HP
LH 160/6 6' x 3/16" 6.3" 4400 5 HP 1 HP
LH 180/6 6' x 1/4" 7.10" 5400 5 HP 2 HP
LH 200/6 6' x 3/8" 7.87" 5800 5 HP 3 HP
LH 160/8 8' x 10 ga. 6.3" 4750 5 HP 1 HP
LH 180/8 8' x 3/16" 7.10" 6160 5 HP 2 HP
LH 200/8 8' x 5/16" 7.87" 6900 5 HP 3 HP
LH 180/10 10' x 10 ga. 7.10" 6900 5 HP 2 HP
LH 200/10 10' x 1/4" 7.87" 7800 5 HP 3 HP